What happened

At the UK-EU Summit in Brussels on 20 November 2026, the two sides announced they had finished negotiating an agreement to link the UK Emissions Trading Scheme (UK ETS) with the EU Emissions Trading System. The joint statement says they aim to apply it from 2028, and the European Commission gives the date as 1 January 2028, subject to ratification on both sides. The same afternoon DESNZ published a detailed explainer for UK ETS participants, ahead of the legal text. Its main points:

  • The link: from 1 January 2028, UK, EU and Swiss allowances can be used for compliance in either scheme, including for 2027 emissions. The registries will be connected so allowances can move between accounts. International credits still cannot be used in the UK ETS.
  • CBAM: the UK government intends to exempt goods originating in the EU, EEA and Switzerland from the UK CBAM from 1 January 2027. The EU exemption for UK-origin goods is expected from 1 January 2028, subject to EU legislation the EU says it will start without delay.
  • Scope: electricity generation, waste incineration, industrial heat, industry, domestic and international shipping, aviation and greenhouse gas removals. The EU's second scheme for buildings and road fuel (EU ETS 2) is not included.
  • The UK cap: the UK still sets its own cap, but it can be no higher than 62.2 million allowances in 2028, 59.5 million allowances in 2029, 57.6 million allowances in 2030, and from 2031 no higher than 7.1% of the equivalent EU cap. Phase II of the UK ETS runs from 2031 to 2040.
  • Free allocation from 2028: the UK aligns with EU benchmarks and the EU process emissions factor (0.91 instead of 0.97), follows the EU phase-out of free allocation for CBAM goods, cuts new entrants' allocation faster and applies Climate Neutrality Plan conditions to installations in the least efficient 20% for their benchmark. Some existing UK rules carry on for 2028 to 2030.
  • Aviation: both sides commit to a "one-stop shop" so airlines flying between the UK and Europe are not dealing with two schemes for one return flight. The Commission says the UK will expand its scheme to aviation and shipping, bringing over 10 million more tonnes of CO2 into it.

The government's summit release repeats its estimates that linking could add up to £3.8 billion a year to the UK economy by 2040 and take £6.5 billion of UK exports, including steel and aluminium, out of the EU CBAM. Our earlier posts covered the draft text of 3 November and the government's figures of 17 November.

What it means for your business

If you import from the EU: this is the biggest change. The UK CBAM starts on 1 January 2027 for aluminium, cement, fertiliser, hydrogen and iron and steel. The government now says it intends EU, EEA and Swiss goods to be exempt from that same date. Until the exemption is in law, HMRC's policy summary still says no country is exempt, so keep your records ready in case the timing slips.

If you export steel, aluminium or other CBAM goods to the EU: your EU customers keep paying the EU CBAM on what you sell them through 2027. The exemption is expected from 1 January 2028, once the EU has legislated, so verified emissions per tonne stay in demand for another year.

If you are in the UK ETS: from 2028 you can buy and surrender EU allowances, and the two carbon prices are likely to move together. Free allocation rules move towards the EU's. Operators will not face an extra condition linked to ESOS recommendations, but the least efficient installations will need a Climate Neutrality Plan to keep their full allocation.

If you are a new entrant or expanding: the reduction factor on new entrants' free allocation falls faster in a linked scheme: 0.913 instead of 0.956 in 2028, 0.869 instead of 0.913 in 2029, 0.825 instead of 0.87 in 2030.

For everyone else: your carbon footprint does not change. A carbon market link changes the price of a tonne and who pays at the border, not the tonnes in your report.

Worked example 1: EU aluminium into the UK in early 2027

Take a UK business importing 300 tonnes of unwrought aluminium alloy billets (commodity code 7601 20 40) from an EU smelter between January and March 2027, on HMRC's default value of 2.03 tonnes CO2e per tonne, with no carbon price relief claimed. At £9.79 per tonne of CO2e for aluminium (illustrative rate):

  • Embedded emissions: 300 × 2.03 = 609 tonnes CO2e.
  • UK CBAM charge without an exemption: 609 × £9.79 = £5,962.11.
  • If the exemption for EU-origin goods is in force from 1 January 2027, as the government intends, that charge would not apply to these billets. Aluminium made outside the EU, EEA, Switzerland and the UK would still carry it.

The 609 tonnes of CO2e stay in your Scope 3 footprint (purchased goods) either way. The rates for January to March 2027 are illustrative until HMRC publishes the official ones. Our guide to working out a UK CBAM bill shows each step.

Worked example 2: free allocation for process emissions

Free allocation for a process emissions sub-installation is worked out from its historical activity level (in tonnes CO2e) times the process emissions factor, before any correction factor. Take an illustrative sub-installation with 10,000 tonnes:

  • Today's UK factor: 10,000 × 0.97 = 9,700 allowances.
  • EU factor from 2028: 10,000 × 0.91 = 9,100 allowances.
  • That is 600 fewer free allowances a year (6.2%), each of which would have to be bought at the linked carbon price if emissions stay the same.

What to do now

  1. Importers: keep your UK CBAM preparations going. Register if you need to, and keep collecting supplier emissions data for non-EU goods, which stay in scope. For EU goods, keep proof of origin: the exemption is for goods that originate in the EU, EEA or Switzerland.
  2. Exporters to the EU: plan on the EU CBAM through 2027. Keep sending verified emissions per tonne to EU customers until the EU exemption is in force.
  3. UK ETS operators: read the explainer's free allocation section now. Check whether you are a new entrant, whether any sub-installation falls in the least efficient 20% for its benchmark, and how a process emissions factor of 0.91 changes your 2028 allocation.
  4. Watch for the legal text. DESNZ will update its explainer with article references once it is published, and the cap for 2028 to 2030 may rise to take in shipping, which the UK ETS Authority will confirm later.