What happened

The Mineral Products Association (MPA), the trade body for the UK's cement, concrete and aggregates producers, published an analysis of HMRC trade figures on 18 November 2026. As Amber Rolt reported for BusinessGreen, it says cement is being re-routed to the UK in the wake of the EU's Carbon Border Adjustment Mechanism (CBAM), which began charging importers into the EU at the start of 2026.

  • Non-EU share up sharply: cement from outside the EU was 29.3% of UK cement imports in January to September 2026, against 17.1% in the same months of 2025. The MPA says non-European imports are at their highest level since records began in 2000.
  • No country breakdown: the HMRC figures it used do not split imports by country, but the MPA points to terminal operators announcing supply links with producers in Turkey.
  • Its concern: cement made outside the EU may be made with coal-fired kilns and electricity. Martin Casey, the MPA's senior director for cement and lime, said: "We are leaving the back door open for higher-carbon construction products to enter the UK."
  • What it wants: the MPA says the UK CBAM, which starts on 1 January 2027, should be "watertight". It says the government's illustrative rates are lower than the EU's, that the UK won't move to country-specific default values until 2029, and it wants the UK and EU emissions trading schemes linked and the two border regimes brought closer together.

That link is close: the UK and EU are due to agree their emissions trading deal on 20 November, which we covered in our post on the UK-EU deal.

What it means for your business

If you import cement, the UK CBAM applies from 1 January 2027. Importers bringing in £50,000 or more of CBAM goods in 12 months have to register with HMRC. Our free CBAM registration checker works through the test.

Our sums: what 1,000 tonnes of imported cement would carry. HMRC's default value for grey Portland cement (commodity code 2523 29 00) is 1.375 tonnes CO2e per tonne, which includes a 10% markup. So 1,000 tonnes counts as 1,375 tonnes CO2e. At the illustrative rate for cement of £8.78 per tonne of CO2e for January to March 2027, the charge would be about £12,073. If the producer can show verified emissions of, say, 0.6 tonnes CO2e per tonne, the same shipment counts as 600 tonnes CO2e and about £5,268. The rate is low because UK cement makers still get most of their emissions allowances free, and the CBAM rate is cut to match.

If you buy concrete or build, it's Scope 3. Cement is the high-carbon part of concrete. A business commissioning a building or buying precast products reports that cement in Scope 3 as purchased goods, and the producer's own emissions figure is far more accurate than a spend-based estimate. Two bags of cement can carry very different footprints depending on the kiln that made them.

What to do now

  1. Importers: check whether your cement, clinker and other CBAM goods come to £50,000 or more in 12 months, and ask each producer now for verified emissions per tonne, so you're not left on the default value in 2027.
  2. Buyers of concrete and building products: ask suppliers where the cement comes from and for an environmental product declaration or a kg CO2e per tonne figure.
  3. Contractors and developers: put that figure in your embodied carbon estimates rather than an industry average, and note the source.